Eagle 05 DD-3 to Spring Brake Conversion Instructions
Posted: Thu Nov 06, 2008 8:36 pm
I received this information today and wanted to pass it along. I want to also add that myself or any other member of Eagles International shall not be held responsible for any documents containing information listed below. It is for illustration purposes only. Any work done by yourself or another party, do so at your own risk.
Now that the legal stuff is done, I want to point out that I do not know of anyone personally that has done this. If anyone does please have them respond to this post and add any pertinent information.
These were sent to me eltronically, so the hand written details are somewhat blurry, but I think you can get the meaning after studying them.
I am grateful to Jim France for sending this to me, and for all those who gave their opinions and advice.
See next post from Dan regarding the 36/36 size spring brake chambers, DO NOT USE THEM!
The first note states 36/36, the second one that is handwritten says either to use 30/30 or 30/36. It could be a typing error and not caught.
I will leave this a sticky for a while, then let it float around in our library of information.
Now that the legal stuff is done, I want to point out that I do not know of anyone personally that has done this. If anyone does please have them respond to this post and add any pertinent information.
These were sent to me eltronically, so the hand written details are somewhat blurry, but I think you can get the meaning after studying them.
I am grateful to Jim France for sending this to me, and for all those who gave their opinions and advice.
See next post from Dan regarding the 36/36 size spring brake chambers, DO NOT USE THEM!
The first note states 36/36, the second one that is handwritten says either to use 30/30 or 30/36. It could be a typing error and not caught.
I will leave this a sticky for a while, then let it float around in our library of information.